24、喷淋装置试验。The test of spraying and flushing equipment Ⅲ. 船舶管系各系统完整性、密性提交用语for the completeness and tightness of the piping system.
1、请把垃圾清除干净Please clear the rubbish.
2、请保持良好通风，并且要做气爆测试Please keep good ventilation and do the gas explosion test.
3、请把系统的完工图提供给我们Please provide us with the finished plan of this system.
4、请把这个穿舱件改成水密的Please change this penetrating piece into water tight construction.
5、把这个阀件拆下检查其是否为截止（止回）阀
Please disconnect this valve to see is it is a non-return valve.
6、这个阀（设备、附件）没有船级社检验钢印，需要补做。
This valve (equipment、accessory) hasn’t been affirmed or stamped by the classification society.
7、这一支管通径（开的位置，外部涂装）不对，一定要按照图纸施工。
The diameter (opening position ,outer painting) of this branch pipe is not correct. It must be fabricated in accordance with the drawing.
8、这路管子不应该穿过油舱（水密舱、人形通道、电缆管）的上方，必须改正以防止事故发生。
This pipe must not pass through from above oil tanks (water-tight compartments、passageways or cables) to prevent any accidents from occurring.
9、焊接（打磨）太糟糕了The welding (grinding) is too bad (too poor).
10、压力表在哪里？安装的位置不合理。
Where’s the pressure gauge? The installation position is not reasonable.
11、这个箱柜居然没有安装泄放阀。Why didn’t you fit a drain valve on this tank?
12、这样布置，对今后操作和维修带来不便。
Such an arrangement is inconvenient to the future operation and maintenance.
13、设备上的好多附件、接口和控制箱怎么都没有铭牌？一定要补做。There are not any nameplates on so many accessories, connections and control boxes. I want to know why.
14、请把压力表拆下来检验“O”位。Please remove the pressure gauge to calibrate its “zero” position.
15、检查期间请停掉泵浦，拆掉升压管。
Please stop the pumps and disconnect the booster pipes during the inspection.
16、这个阀件关不死，请修理或调换。
This valve cannot be closed tightly. Please repair it or have it changed.
17、管路末端要拆下来并且用水把里面的垃圾冲干净。
Please disconnect the pipe ends and flush it with water.
18、这个问题我们将同设计所商议，并争取尽快给予答复。We’ll contact with the technology research institute in respect of the technical problem and reply to you as soon as possible.
www.99jianzhu.com/包含内容：建筑图纸、PDF/word/ppt 流程，表格，案例，最新,免费下载,施工方案、工程书籍、建筑论文、合同表格、标准规范、CAD图纸等内容。