国外碟簧计算软件_(version_1)

国外碟簧计算软件_(version_1)

Disc Springs, Data Sheet

group 2

part./drawing no.:

Version 19.7.9817 0006project:0

2015/9/21

0Muhr und Bender, Tellerfedern und Spannelemente GmbH, Postfach 120, 57564 Daadenphone.: sales: 02743/806-184, -194, Fax.:-188; engineering: 02743/806-268, -134, -135, Fax.: -292

remarks

max upper stress:

max compress. stress:

setting at 20°C:

setting at 100°C:

calculated data

disc-angle at L0:

De at flat:

Di at flat:

center of rotation:

Load tolerance:

rel. min. load at disloading:

tolerance inner diam.:

tolerance outer diam.:

gap at inner diam.:

gap at outer diam.:

tolerance of thickness:

tolerance of spring height:8.683°79.907 mm41.143 mm58.344 mmtolerances concerning Mubea-disc-spring-handbook+15 / -7,5 %87.5 %41.000 mm79.650 mm0.600 mm1.000 mm2.130 mm5.100 mmtoto2.290 mm5.400 mmplease contact Mubea!at 75% of h0 of one springat 75% of h0 of the stacktoto41.25080.000 mm mm1290MPa-3348MPaS2 too high! upper stress too high!0.3 % after 48h4.8 % after 48h1.0 % after 1000h6.4 % after 1000h Stresses sigma 2 and sigma 3 differ very much! Material may be better used.

bbs.99jianzhu.com内容：建筑图纸、PDF/word 流程，表格，案例，最新,施工方案、工程书籍、建筑论文、合同表格、标准规范、CAD图纸等内容。